Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 74/168
1.6. SERVICE MENU
This menu gives access to the servicing of the measurement unit(s), their parameters
and the network.
1.6.1. Servicing of the measurement unit
1.6.1. 1) Servicing of the measurement unit parameters
This menu allows the saving, the recovery or the deletion of the test cycle parameters of
a measurement unit.
9 DELETE menu: allows the deletion of all the parameters.
9 RECOVERY menu: allows the recovery of all the parameters.
9 SAVE menu: allows the saving of all the parameters.
1.6.1. 2) Servicing of the sensors
This menu allows the monitoring of the information supplied by the sensors.
The screen displays the gross values
measured by the pressure sensors.
SERVICE
PARAMETERS
SENSOR
LEAK : 0052
PRESSURE : 0001
10:29:45 02/07/2002
1.6.1. 3) Servicing of the central parameters
This menu allows the saving, recovery or deletion of the C540 central module
parameters. This menu only appears when the key is in the "ACCESS" position.
9 DELETE menu: allows the deletion of all the parameters.
9 RECOVERY menu: allows the recovery of all the parameters.
9 SAVE menu: allows the saving of all the parameters.
To Next Page
Loading...