ATEQ F580 - Page 83

Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 73/168
1.5.6. "HEAD NAME" menu
This menu allows the operator to set name(s) for the measurement unit(s) (head) to
identify and recognise them more easily.
This name can be found in the "CURVE" display.
Follow the procedure bellow to set the name of a measurement unit.
Using the "UP" and "DOWN" keys,
place the cursor in front of the
measurement unit to be named.
CONFIG
CENTRAL
NETWORK
LANGUAGE : ENGLISH
PRINTER
HOUR
BACKLIGHT
HEAD NAME
HEAD 01 : F5 :
HEAD 02 : F5 :
10
:
5
9
:
3
2
18/06/2002
Confirm with the “ENTER" key, the
cursor places itself on the right. Using
the "UP" and "DOWN" keys, choose the
alphanumeric character.
CONFIG
CENTRAL
NETWORK
LANGUAGE : ENGLISH
PRINTER
HOUR
BACKLIGHT
HEAD NAME
HEAD 01 A
HEAD 02 :
09:55:22 02/07/2002
When the required character is
displayed, move to the next with the
"RIGHT ARROW".
It is possible to move back to previous
characters with the "LEFT ARROW".
Once the whole name is entered,
confirm with the "ENTER" key.
CONFIG
CENTRAL
NETWORK
LANGUAGE : ENGLISH
PRINTER
HOUR
BACKLIGHT
HEAD NAME
HEAD 01 AB
HEAD 02 :
05:55:45 02/07/2002
Note: maximum number of characters for the name of a unit: 13.
1.5.7. "HEAD XX" menu
This menu accesses the configuration and extended menus of the measurement units.
For more information refer to the user manual for the measurement unit concerned.