Manual, F/T Sensor, Data Acquisition (DAQ) Systems
Document #9620-05-DAQ.indd-20
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: 919.772.0115 • Fax: 919.772.8259 • www.ati-ia.com • Email: info@ati-ia.com
65
8. Regulatory Information
The regulator information applies to the ATI product covered in this manual. Product described from other
manufacturers products are excluded. It is the users responsibility to verify product other than ATI product meet the
regulatory requirements.
8.1 Electromagnetic Compatibility
The ATI products meet the requirements for the following EMC standards for electrical equipment for
measurement, control, and laboratory use:
Emissions:EN61326-1:2013
EN55011:2009 + A1:2010
EN61000-3-2:2006 +A1:2009 +A2:2009, EN61000-3-3:2013
Immunity: EN61326-1:2013
EN61000-4-2:2009, EN61000-4-3:2006 + A2:2010,
EN61000-4-4:2012, EN61000-4-5:2006, EN61000-4-6:2009,
EN61000-4-8:2010, EN61000-4-11:2004
EN61000-4-8:2010, EN61000-4-11:2004
8.2 RoHS Compliance
The ATI products conforms to EU Directive CE 2011/65/EU (RoHS).
8.3 Safety Standards
The ATI products are designed to meet the requirements of the following electrical equipment safety
standards for measurement, control, and laboratory use:
TBD
To Next Page
Loading...
Need help?
General
