FlexiROC T35 R/T40 R 6 Operating
85 No: 3171473547.1 en
!
NOTE: The gradient meter shows the chassis frame inclination and not the actual
ground inclination.
Tramming
1.
Put the remote control box into tramming and positioning mode. Knob S130, position
(h).
2.
Position the feeder against the feed support (A). Multi-function levers S261 and S280.
3.
Raise the hydraulic jack. Switch S209, position (a).
4.
Open the tract oscillation lock. Switch S445, position (c).
Remote control box.
5.
Choose tramming speed depending on the terrain. Switch S137, position (a) or (b).
To Next Page
Loading...
