Atlas Copco FOCUS 60 - Page 55

Focus 60 / Focus 61 User Guide Programming Focus 60 / Focus 61
9839 0211 01 Edition 1.1 55 (106)
To associate a MWR-TA with a Station, drag one of the available MWR-TA and drop it into the Wrench
menu of the Station (refer to the figure below):
On the MWR-TA associated, the YELLOW LEDs are active.
NOTE: The following LEDs characterize the MWR-TA:
 Yellow
 Red
 Green
 Blue
For further details about MWR-TA LEDs, refer to the “MWR-TA and Charging Cradle MWR
User Guide”.
Drag the wrench icon from the
Available Wrenches section to the
wrench icon placed in Device
Files area