To Restart the Network:
1. In the Main Room, with the AVR21EN and video display ON,
using the AVR21ENR1 remote, press the
AVR Button 4.
2. Press the
Menu Button . The MAIN MENU will appear.
3. Press the
⁄
/
¤
Navigation Button F to place the cursor
next to
DIAGNOSTICS. Press the
Set Button H. The
DIAGNOSTICS screen will appear.
4. With the cursor next to RESTART NETWORK, press the
Set
Button
H
. The RESTART NETWORK screen will appear
(
Figure 81).
5. Press the
⁄
/
¤
Navigation Button F to place the cursor next
to YES. Press the
Set Button H. The menu will automatically
return to the DIAGNOSTICS screen.
6. To manually return to DIAGNOSTICS, without restarting,
position the cursor next to BACK TO DIAGNOSTICS, press
the
Set Button H.
To return to system mode, press the
Exit Button G.
KP21 Setup Menu and Options
KEYPAD
1. Press Menu .
2. Press
Setup .
Setup 1
ON VOLUME:
On Volume is the level the zone will turn on to with On Volume
set to YES on the SETUP 2 page. On Volume set to NO will have
the zone turn on to the volume set when the zone was turned off.
Press the
¤
ON VOLUME
⁄
Buttons to adjust Turn-On
Volume.
PAGING VOLUME:
Paging Volume is the level the zone will switch to for
incoming pages.
Press the
¤
PAGING VOLUME
⁄
Buttons to adjust
Paging Volume.
BASS
Press the
¤
BASS
⁄
Buttons to adjust Bass.
TREBLE
Press the
¤
TREBLE
⁄
Buttons to adjust treble.
Press
> to advance to SETUP 2.
Setup 2
ON VOLUME
Set to YES to have the zone turn on to the level set in Setup 1/
ON VOLUME. Set to NO to have the zone turn on to the
volume set when the zone was turned off.
Press the ON VOL ON/OFF
Button to desired setting
as described above.
Page Volume
Set to YES to have incoming pages switch to the level set in
Setup 1/PAGE VOLUME. Set to NO to have incoming pages
switch to the last set volume.
Press the PAGE ON/OFF
Button to desired setting
as described above.
PARTY VOLUME
This setting will adjust the volume that each zone in an
Entertainment Group will switch to when an Entertainment
Group is selected by pressing PARTY MODE from any keypad
that is configured as part of an Entertainment Group.
Press the
¤
PARTY VOL
⁄
Buttons to set zone Party
Mode Volume.
Press
< to return to Setup 1.
Press
> to advance to Setup 3.
Setup 3
SPEAKER EQ
Speaker EQ allows contouring of zone EQ by optimizing system
settings for the specific models of popular speakers listed. If the
speakers used do not appear in the list, select NOT LISTED.
a) Press SPEAKER EQ .
b) Press the button ( ) next to the model of speakers
connected to this keypad.
c) Press NOT LISTED if the specific model is not on the list.
d) Press
> to advance to the next page of speaker options.
e) Press
< to return to the previous page of speaker options.
f) Press BACK to return to SPEAKER EQ.
BACKLIGHT
Backlight allows selection of backlight color (green, aqua, blue,
none) and fade (time-out) duration (2–20 seconds).
a) Press BACKLIGHT .
b) Select the preferred backlight color .
c) Press OFF for no backlight .
d) Press FADE MODE ON/OFF to turn fade on/off .
(OFF will leave backlight on when zone is on.)
e) Press
‹
FADE TIME
›
to adjust fade time.
f) Press
BACK to return to BACKLIGHT.
Press
< to return to SETUP 2.
Press
> to advance to SETUP 4.
Setup 4
Power On Mode
Power On mode sets the source that will be selected when this
zone is turned on from the keypad or remote. SILENT will have
the zone turn on to the MAIN MENU with no source selected.
LOCAL will have the zone turn on to the local source. LAST will
have the zone turn on to whatever source was selected when the
zone was turned off. RADIO 1 and RADIO 2 will have the zone
turn on to either Radio 1 or 2 as selected (Wake-Up Groups set to
specific sources will turn zones on to those sources, unless the
group is set to LAST).
a) Press POWER ON MODE .
b) Select the source to be selected when the zone is turned on
with the keypad or remote .
c) Press BACK to return to POWER ON MODE.
91
KP21 Setup
To Next Page
Loading...