SETTINGS
This screen provides information regarding keypad firmware/soft-
ware versions. There are no configurable settings in this screen .
Reset Settings
CAUTION! Pressing this button will reset this keypad’s settings to
factory defaults. Any programming for timers or preferences will
be erased. Only press this button to clear all keypad settings.
a) Press RESET SETTINGS . (The zone will turn off for a few
seconds and then turn on to the SYSTEM INITIALIZING
screen. The zone will turn off when reset is complete.)
b) Press the keypad POWER BUTTON .
c) Press MENU for MAIN MENU.
d) Press SETUP to configure keypad settings or select
another system function.
LED Dimmer
LED Dimmer adjusts the brightness of the keypad backlighting.
a) Press LED DIMMER .
b) Press the
¤
LED DIMMER
⁄
Buttons until backlight is
set to preferred brightness.
c) Press BACK to return to LED DIMMER.
d) Press MENU to return to MAIN MENU.
92
KP21 Setup
To Next Page
Loading...