AudioCodes Mediant 4000 SBC - Page 807

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "ConnectTime" for Syslog and Local Storage, and
"h323-connect-time=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 35.
Dest Port
[406]
Displays the SIP signaling destination UDP port. The field is an integer of up to
10 digits.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SigDestPort" for Gateway Syslog and Local
Storage, and "DestPort" for SBC Syslog and Local Storage.
■ The maximum number of characters for Syslog tabular alignment is 11.
Destination
Host Before
Manipulation
[815]
Displays the original destination hostname (before manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Host
[813]
Displays the destination hostname (after manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
IP
[403]
Displays the destination IP address. The field is a string of up to 20 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "DestIp".
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Tags
[441]
Displays destination tags.
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format and Gateway CDR Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 32.
- 774 -