AudioCodes Mediant 4000 SBC - Page 806

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
[431] Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "Caller" in the CDR.
■ The maximum number of characters for Syslog tabular alignment is 51.
CDR Type
[300]
Displays the application type of the CDR. The field is an integer:
■ "2": Gateway CDR
■ "3": SBC signaling CDR
■ "4": SBC media CDR
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC media and signaling, and Gateway
CDRs.
■ The maximum number of characters for Syslog tabular alignment is 6.
Channel ID
[600]
Displays the port (channel) ID.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "Cid" in the CDR.
■ The maximum number of characters for Syslog tabular alignment is 5.
Coder Type
[601]
Displays the coder used for the call. The field is a string, for example,
"g711Alaw64k", "g711Ulaw64k" and "g729".
Note:
■ The field is included in the default CDR.
■ The field is applicable to "CALL_CONNECT", "MEDIA_START", "CALL_
END", and "MEDIA_END" CDR Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "Coder" in the CDR.
■ The maximum number of characters for Syslog tabular alignment is 15.
Connect
Time
[412]
Displays the date and time that the call was connected. The field is a string of
up to 35 characters and in the following format: <hh:mm:ss:ms> UTC <DDD>
<MMM> <DD> <YYYY>. For example, "17:00:49.053 UTC Thu Dec 14 2017"
Note:
■ To configure the time zone string (e.g., "UTC" - default, "GMT+1" and
"EST"), use the TimeZoneFormat parameter.
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_CONNECT" and "CALL_END" CDR
Report Types.
- 773 -