AudioCodes Mediant 4000 SBC - Page 805

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Call ID
[301]
Displays the unique ID of the call, which appears in the SIP Call-ID header.
The field is a string of up to 130 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable to SBC media and signaling, and Gateway CDRs.
■ The default field title is "SIPCallId" for Syslog and Local Storage, and "call-
id=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 50.
Call Orig
RADIUS
[434]
Displays the originator of the call:
■ "answer": Call originated from the IP side (Gateway) or incoming leg (SBC)
■ "originate": Call originated from the Tel side (Gateway) or outgoing leg
(SBC)
Note:
■ The field is included in the default CDR.
■ The field is applicable to CDR Report Types "Start Acc" and "Stop Acc".
■ The field is applicable to all types, but mainly to RADIUS (SBC and
Gateway CDRs).
■ The default field title is "h323-call-origin=" for RADIUS.
■ The maximum number of characters for Syslog tabular alignment is 10.
Call Orig
[401]
Displays which side originated the call for the specific leg.
■ "LCL": SBC Outgoing leg (called party side) or Tel side
■ "RMT": SBC Incoming leg (i.e., caller party side) or IP side
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "Orig" for Syslog and "Direction" in the Web SBC
CDR History and Web Gateway CDR History tables.
■ The maximum number of characters for Syslog tabular alignment is 5.
Callee
Display ID
[432]
Displays the name of the called party. The field is a string of up to 36
characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "Callee" in the sent CDR.
■ The maximum number of characters for Syslog tabular alignment is 37.
Caller
Display ID
Displays the name of the caller (caller ID). The field is a string of up to 50
characters.
- 772 -