AudioCodes Mediant 4000 SBC - Page 816

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
[438] ■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "ProxySetId (name)".
■ The maximum number of characters for Syslog tabular alignment is 32.
RADIUS
Call ID
[307]
Displays the RADIUS call ID.
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format and Gateway CDR Format tables.
■ The field is applicable only to all CDR Report Types.
■ The field is applicable only to SBC and Gateway RADIUS CDRs.
■ The default field title is "h323-conf-id=" in RADIUS CDRs.
■ The maximum number of characters for Syslog tabular alignment is 50.
Redirect
Reason
[414]
Displays the reason for the call redirection. The field is an integer of up to 15
digits:
■ "-1": Not relevant
■ "0": Unknown reason
■ "1": Call forward busy (CFB)
■ "2": Call forward no reply (CFNR)
■ "3": Call forward network busy
■ "4": Call deflection
■ "5": Immediate call deflection
■ "6": Mobile subscriber not reachable
■ "9": DTE out of order
■ "10": Call forwarding DTE
■ "13": Call transfer
■ "14": Call pickup
■ "15": Call systematic or call forward unconditional (CFU)
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "RedirectReason".
■ The maximum number of characters for Syslog tabular alignment is 15.
Redirect
URI Before
Manipulation
[805]
Displays the original call redirect URI (username@host) before manipulation, if
any. The field is a string of up to 150 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The default field title is "RedirectURINumBeforeMap".
■ The maximum number of characters for Syslog tabular alignment is 41.
- 783 -