AudioCodes Mediant 4000 SBC - Page 817

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
Redirect
URI
[804]
Displays the original call redirect URI (username@host) after manipulation, if
any. The field value is a string of up to 150 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The default field title is "RedirectURINum".
■ The maximum number of characters for Syslog tabular alignment is 41.
Release
Time
[413]
Displays the date and time the call ended (disconnected). The field is a string of
up to 35 characters and presented in the following format: <hh:mm:ss:ms>
UTC <DDD> <MMM> <DD> <YYYY>. For example, "17:00:55.002 UTC Thu
Dec 14 2017".
Note:
■ To configure the time zone string (e.g., "UTC" - default, "GMT+1" and
"EST"), use the TimeZoneFormat parameter.
■ The field is included in the default CDR.
■ The field is applicable to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "ReleaseTime" for Syslog, "h323-disconnect-time="
for RADIUS, and "Call End Time" in the Web SBC CDR History and Web
Gateway CDR History tables.
■ The maximum number of characters for Syslog tabular alignment is 35.
Remote
Input Octets
[614]
Displays the remote input octets (bytes).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Remote
Input
Packets
[612]
Displays the number of packets that the remote side reported it received. The
field is an integer from 0 to 0XFFFFFFFF.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Remote IP
[404]
Displays the remote SIP IP address.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
- 784 -