AudioCodes Mediant 4000 SBC - Page 818

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
■ The field is applicable only to "CALL_START", "CALL_CONNECT", and
"CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The field is applicable to Syslog, RADIUS, Local Storage, and Web History
CDRs.
■ The default CDR title is "Remote IP" in the Web SBC CDR History and
Web Gateway CDR History tables.
■ The maximum number of characters for Syslog tabular alignment is 20.
Remote
Jitter
[618]
Displays the remote RTP jitter. The field is an integer from 0 to 40000 samples
(-1 if unavailable).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format tables.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 9.
Remote
MOS CQ
[628]
Displays the remote MOS for conversation quality. The field is an integer from
10 to 46 (127 if information is unavailable).
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "RemoteMosCQ".
■ The maximum number of characters for Syslog tabular alignment is 11.
Remote
Output
Octets
[615]
Displays the remote output octets (bytes).
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
Remote
Output
Packets
[613]
Displays the number of packets received by the device. The field is an integer
from 0 to 0XFFFFFFFF.
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■ The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 10.
- 785 -