AudioCodes Mediant 4000 SBC - Page 824

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Field Description
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SIPTrmReason".
■ The maximum number of characters for Syslog tabular alignment is 12.
Source Host
Before
Manipulation
[814]
Displays the original source hostname (before manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Source Host
Name
[517]
Displays the source hostname (after manipulation, if any).
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The default field title is "SrcHost".
■ The maximum number of characters for Syslog tabular alignment is 20.
Source Host
[812]
Displays the source hostname (after manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format table.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Source IP
[402]
Displays the source IP address. The field value is a string of up to 20
characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SourceIp".
■ The maximum number of characters for Syslog tabular alignment is 20.
Source Port
[405]
Displays the SIP signaling source UDP port. The field value is an integer of up
to 10 digits.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "SigSourcePort" for Gateway Syslog, and
"SourcePort" for SBC Syslog and Local Storage.
■ The maximum number of characters for Syslog tabular alignment is 13.
- 791 -