AudioCodes Mediant 4000 SBC - Page 843

CHAPTER51 Reporting Information to External Party
Mediant 4000 SBC | User's Manual
Attrib-
ute ID
Attribute
Name
Vendor-
Specific
Attribute
(VSA) ID
Description
Value
Format
Example AAA
48 acct-
oputput-
packets
(Standar
d)
Number of
packets sent
during the call
Numeri
c
- Stop
Acc
61 nas-port-
type
(Standar
d)
Physical port
type of device
on which the
call is active
String 0: Asynchronous Star
t
Acc
Stop
Acc
Response Attributes
26 h323-
return-
code
103 The reason
for failing
authentication
(0 = ok, other
number failed)
Numeri
c
0 Request
accepted
Stop
Acc
44 acct-
session-id
(Standar
d)
A unique
accounting
identifier –
match start &
stop
String - Stop
Acc
Below is an example of RADIUS Accounting, where non-standard parameters are preceded with
brackets:
Accounting-Request (4)
user-name = 111
acct-session-id = 1
nas-ip-address = 212.179.22.213
nas-port-type = 0
acct-status-type = 2
acct-session-time = 1
acct-input-packets = 122
acct-output-packets = 220
called-station-id = 201
calling-station-id = 202
// Accounting non-standard parameters:
(4923 33) h323-gw-id =
(4923 23) h323-remote-address = 212.179.22.214
(4923 1) h323-ivr-out = h323-incoming-conf-id:02102944 600a1899 3fd61009 0e2f3cc5
(4923 30) h323-disconnect-cause = 22 (0x16)
(4923 27) h323-call-type = VOIP
(4923 26) h323-call-origin = Originate
(4923 24) h323-conf-id = 02102944 600a1899 3fd61009 0e2f3cc5
- 810 -