AudioCodes MSBR Series User Manual

CHAPTER3 SNMP Trap Events (Notifications)
MSBR | SNMP Alarms
Event linkUp
[LinkUpDownTrapIfIndexSuffixEnable] parameter to 0.
Link Down Trap
Table 3-18: linkDown
Event linkDown
OID 1.3.6.1.6.3.1.1.5.3
MIB IF-MIB
Description The alarm is sent if a communication link failure is detected. Categorized
by the RFC as an “enterprise-specific trap”.
By default, the index of the interface is included in the trap. If you want to
disable the inclusion of the index, configure the
[LinkUpDownTrapIfIndexSuffixEnable] parameter to 0.
Enhanced BIT Status Trap
Table 3-19: acEnhancedBITStatus
Event acEnhancedBITStatus
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.18
Description The alarm is sent for the status of the BIT (Built In Test). The
information in the trap contains blade hardware elements being
tested and their status. The information is presented in the
Additional Info fields.
Default Severity Indeterminate
Source Varbind Text BIT
Event Type Other
Probable Cause other (0)
Alarm Text Notification on the board hardware elements being tested and
their status.
Status Changes
Additional Info-1 BIT Type: Offline, startup, periodic
- 75 -

AudioCodes MSBR Series Specifications

General

Brand	AudioCodes
Model	MSBR Series
Category	Security System
Language	English