Related links
Station administration on page 47
Administering features and CAs for all other IP deskphones
You can administer Feature/Call Appearance Buttons 1 to 24 on the Communication Manager
Station form. The features administered on the Station form appear in the same sequence on the
deskphone Feature screen.
Features administered on the Expansion Module (SBM24/BM12) Call Appearance buttons display
on the deskphone Features screen following the first 24/12 administered feature buttons.
All administered Button Module Labels, Call Appearances and Feature Buttons, display on the
corresponding module buttons.
In the
Table 1: Station form administration results on page 48 the term phone screen refers to
either the call appearance screen or the features screen, as applicable to the button type.
Table 5: Station form administration results
Feature / Call
Appearance (CA) /
Bridged Call
Appearance (BA)
buttons on the
Station form...
Displayed as:
1 to 3 N/A 9608/9608G/
9611G
N/A 9621G/ 9641G/
9641GS
4 to 11 CAs/BAs on Phone
screen; must scroll to
see more than 3
CAs/BAs on
Phone screen:
must scroll to see
more than 6
Aux buttons 1 to
8 CAs/BAs on
Phone screen;
must scroll to
see more than 3
CAs/BAs on
Phone screen; all
buttons also
appear on the
Quick Touch
panel (if enabled)
and not on the
display screen. If
Quick Touch
panel is disabled,
6 CAs display;
switch to
Features and
scroll to see up to
12 feature buttons
12 to 19 N/A Scroll to see CAs/
BAs, features on
Feature List
Aux buttons 9 to
16
Scroll to see CAs/
BAs, features on
Feature List
Table continues…
Communication Manager Administration
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 48
Comments on this document? infodev@avaya.com
To Next Page
Loading...
