Add to phonebook Yes Yes Yes Yes
Characters per line
(normal font)
31 40 39 39
Characters per line
(large font)
25 22 26 26
Characters per
softkey (normal
font)
8 8 8 8
Characters per
softkey (large font)
6 6 8 8
Related links
Managing applications on the Home screen on page 119
Administering features on softkeys
You can administer call server features on softkeys on the deskphhone. The number of features
you can place on a set of softkeys depends on the call state the deskphone is presenting to the
user.
The chart below lists the call states for which you can administer softkeys, the relevant system
parameter associated with a call state, the maximum number of features you can specify in that
system parameter, and the softkey numbers that can take administered features.
Call State System Parameter Maximum number of
features allowed
Available Softkeys
Idle IDLEFEATURES 6 All softkeys
Dialing DIALFEATURES 5 1, 3, & 4
Active with ringback RINGBKFEATURES 3 3
Active with talk path TALKFEATURES 3 4
Note:
For more information about the system parameters, see 9600 Series H.323 customizable
system parameters on page 71.
Administration of softkeys works as follows:
• Administer feature buttons for the deskphone on the call server as you normally would, and
the call server sends these button assignments to the deskphone as it always has.
• In the 46xxsettings file, administer any or all of the system parameters indicated in the chart
above. Each parameter consists of a list of one or more feature numbers, up to the maximum
indicated in that chart, with each feature number corresponding to a specific administrable
feature. CM Feature Numbers for Assigning Softkeys on page 124 lists the administrable
features and their associated numbers.
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 122
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
