Administering settings at the phone
Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 describes how to use Craft local procedures at the phone for administration. The local
procedures you might use as an administrator are:
• 802.1x - Enable or disable the Supplicant and the Pass-thru options.
• AGC - Enable/disable Automatic Gain Control.
• ADDR - Add the IP addresses for the call server, HTTP server, HTTPS server, and other
network related parameters.
• CLEAR - Remove all administered values, user-specified data, option settings, etc. and
return a phone to the phone's initial “out of the box” default values.
• CONT - Adjust the contrast of button Modules and any non-color deskphones.
• DEBUG - Enable or disable debug mode for the button module serial port.
• GROUP - Set the group identifier on a per-phone basis.
• LOG - Enable/disable event logging.
• LOGOUT - Log off the deskphone.
• MLS - View multi-language text strings.
• SIG - Set the signaling protocol.
• HSEQUAL - Administer the HAC related parameters.
• INT - Set or change the interface control value(s) of PHY1STAT and/or PHY2STAT.
• RESET - Reset the deskphone to default values including any values administered through
local procedures, and the values previously downloaded using DHCP or a settings file.
• RESTART - Restart the deskphone in response to an error condition, including the option to
reset parameter values.
• SSON - To add site specific options.
• Test - To run a self test on the phone.
• VIEW - Review the 9600 IP deskphone system parameters to verify the current parameter
values and file versions.
• VPN - Administer VPN settings.
Note:
If you have not changed the default password, the Debug option is available in a Read-Only
mode.
You can use the DEBUG option only if you change the default password to the Craft local
procedures through the PROCPSWD parameter.
Administering Deskphone Options
March 2018 Administering Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP Deskphones H.
323 116
Comments on this document? infodev@avaya.com