9641G Call Center faceplate installation
Special faceplate kits are available for 9641G IP Deskphones (9641G Call Center
Faceplate Kit (PK25) (Comcode 700500728) used in a call center. The removeable
faceplate has the following features:
• Covers the handset pockets,
• Maintains the switch hook “down” position,
• Covers the Forward and Headset buttons, and
• Relabels the Speaker button as the Release button to facilitate ending
calls.
Note:
The Release button must be administered as such, the AGTSPKRSTAT
parameter set to "2" and the CALLCTRSTAT parameter set to "1" to allow
Release button operation for 9641G deskphones.
To install the 9641G Call Center faceplate:
Installing the Deskphone
24 H.323 Installation & Maintenance Guide R6.1 May 2011
To Next Page
Loading...
