Shown As
(this value
always
displays in
English)
Craft Procedure Purpose See
INT Interface Control Changing Ethernet interface control on
page 50.
LOG Enable/disable Event Logging Disabling/enabling event logging on
page 52.
LOGOUT Log off the telephone Logging off the deskphone on
page 53.
MLS View Multi-Language text
Strings
Viewing multi-language strings on
page 53.
RESET
VALUES
Reset system initialization
values to defaults
Resetting system values on page 54.
RESTART
PHONE
Restart the telephone Restarting the deskphone on
page 55.
SIG Set the signaling protocol
download flag
Setting or changing the signaling
protocol on page 56.
SSON Set the Site-Specific Option
Number
Changing SSON settings on page 57.
TEST Initiate a self-test Performing a self-test on page 58.
VIEW View current parameter values
and file names
Using the VIEW craft procedure for
troubleshooting on page 66.
VPN Administer and/or view Virtual
Private Network (VPN) settings
VPN Setup Guide for 9600 Series IP
Telephones(Document 16-602968).
Setting the 802.1X Operational Mode
Use the following procedure to set or change the operational mode.
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result
as selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Using Local Administrative (Craft) Options
40 H.323 Installation & Maintenance Guide R6.1 May 2011
To Next Page
Loading...
