Logging off the deskphone
Use the following procedure to log off a telephone.
Note:
If a user registered (logged in) via a USB device, this procedure is not applicable.
The only way to log off a telephone registered with a USB device is by removing
the device.
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result
as selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Caution:
Once a telephone is logged off, a password and extension might be needed to
log back on.
1. When you select LOGOUT from the Craft Local Procedure Screen, the telephone
displays the following text:
Press Log Out again to confirm
2. Press Cancel to return to the Craft Local Procedure screen without logging off the
telephone.
Press Log Out to unregister the telephone from the call server.
Viewing multi-language strings
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result
as selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Logging off the deskphone
H.323 Installation & Maintenance Guide R6.1 May 2011 53
To Next Page
Loading...
