Avaya 9608 - Chapter 7: Using the conference feature; Setting up a conference call

1. When you select RESET VALUES from the Craft Local Procedure Screen, the
telephone displays the following text:
Press Reset to confirm.
2. Press Cancel to return to the Craft Local Procedure screen without resetting the
telephone.
Press Reset to start the telephone reset.
The telephone resets from the beginning of registration, which might take a few
minutes. A reset:
• Resets all system values and system initialization values except AUTH and
NVAUTH to default values.
• Resets the 802.1X ID and Password to their default values.
• Resets call server values to their defaults.
• Deletes any entries in the Redial buffer.
• Does not affect user-specified data and settings like Contacts data or the
telephone login and password. To remove this type of data, see
Clearing the
deskphone settings on page 47.
Restarting the deskphone
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result
as selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Use the following procedure to restart the telephone.
1. When you select RESTART PHONE from the Craft Local Procedure Screen, the
telephone displays the following text:
Press Restart to confirm.
2. Press Cancel to return to the Craft Local Procedure screen without restarting the
telephone.
Restarting the deskphone
H.323 Installation & Maintenance Guide R6.1 May 2011 55