Avaya 9608 - Clearing the Deskphone Settings

Press Change to toggle the selected setting from On to Off or vice versa.
3. Press Save to store the new setting, update the associated system value, and
redisplay the Craft Local Procedure screen.
Clearing the deskphone settings
Sometimes, you might want to remove all administered values, user-specified data,
and option settings. Essentially, you want to return a telephone to its initial “clean
slate” or out of the box condition. This is usually done when passing a telephone
to a new, dedicated user when the LOGOFF option is not sufficient. For example,
a new user is assigned the same extension, but requires different permissions than
the previous user.
The CLEAR option erases all administered data—static programming, HTTP and
HTTPS server programming, and user settings including Contact button labels and
locally programmed Feature button labels, and restores all such data to default
values. The CLEAR option does not affect the software load itself. If you have
upgraded the telephone, the telephone retains the latest software. Once you have
cleared a telephone, you can administer it normally.
Caution:
This procedure erases all administered data, without any possibility of recovering
the data. Neither the boot code nor the application code is affected by this
procedure.
Note:
When updating local (Craft) procedures from a touchscreen deskphone, touching
the line you want to change or the applicable softkey produces the same result
as selecting a line and pressing the applicable softkey on a non-touchscreen IP
Deskphone.
Use the following procedure to clear the telephone of its administrative, user-
assigned and options values.
1. When you select CLEAR from the Craft Local Procedure Screen, the telephone
displays the prompt Press Clear again to confirm.
2. If you do not want to clear all values, press Cancel to terminate the procedure and
retain the current values.
Press Clear to clear all values to their initial default values.
Clearing the deskphone settings
H.323 Installation & Maintenance Guide R6.1 May 2011 47