EasyManuals Logo

Avaya Aura System Platform User Manual

Avaya Aura System Platform
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
The system displays output similar to the one shown below:
13. Format the USB drive by typing the command mkfs -t vfat /dev/sdb1.
Setting up a USB drive
Prerequisites
The user is logged in as root and is currently in the /root directory.
Note:
If you are not familiar with Linux commands, Avaya recommends that you install System
Platform using a DVD.
1. Create a directory for the System Platform build by typing the following command:
mkdir /root/sp-builds
Note:
In this example, the directory /root/sp-builds is created and used.
2. Copy the ISO image to this directory.
3. Create a directory in sp-builds for temporarily mounting the ISO image by typing
the command mkdir /root/sp-builds/isotemp.
4. Mount the ISO image on your system by typing the following command:
mount -o loop /root/sp-builds/vsp-1.1.0.0.10.iso /root/sp-
builds/isotemp
5. Type the following command to copy the mounted directory (and the ISO image )
to another directory for running the script.
cp -r /root/sp-builds/isotemp /root/sp-builds/isocopy
Using USB drive for System Platform installation
92 Installing and Configuring Avaya Aura
System Platform April 2010

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Avaya Aura System Platform and is the answer not in the manual?

Avaya Aura System Platform Specifications

General IconGeneral
BrandAvaya
ModelAura System Platform
CategoryServer
LanguageEnglish

Related product manuals