Avaya Aura System Platform User Manual

Next steps
Configure network settings for Console Domain.
System Domain Network Configuration field descriptions
Names Descriptions
Hostname The host name for System Domain (Dom-0). This must be a fully
qualified domain name (FQDN).
Primary DNS The primary DNS server address.
Secondary DNS (Optional) The secondary DNS server address.
Physical Devices eth0 and eth1
These are the physical Ethernet interfaces (NICs) on the server. You
must configure these interfaces for IP.
Static IP The static IP address for the eth0 option.
Subnet Mask The subnet mask address for the Ethernet interface.
You can modify the default value of Subnet Mask, if required. The
default value is 255.255.255.0.
Default gateway
IP
The default gateway IP address for each Ethernet interface.
This default gateway IP address will be used for all the virtual
machines, if you do not specify gateway IP addresses for them.
Note:
Although you can enter default gateway for each interface, you
should specify only one default gateway. Specifying more than one
default gateway may result in an unusable internal networking
configuration.
Configuring network settings for Console Domain
1. On the System Platform Console Domain Network Configuration screen, complete
the following fields to set up the console domain network:
• Hostname
• Static IP
Installing System Platform using laptop
52 Installing and Configuring Avaya Aura
™
System Platform April 2010

Avaya Aura System Platform Specifications

General

Brand	Avaya
Model	Aura System Platform
Category	Server
Language	English