Electrostatic alert:
When handling any components of an S8300 Server or Branch Gateway, wear an anti-static
wrist ground strap. Connect the strap to an approved ground, such as an unpainted metal
surface.
Note:
Avaya has developed special hardware platforms for customers with harsh environmental
conditions. These platforms have been tested to meet stringent physical and environmental
requirements (i.e., shock, vibration, EMI, etc.) imposed by the United States Navy for use on
their ships. The platforms make use of specialized racks and reinforcements. If you wish to
obtain information about the design and implementation of such a ruggedized solution, contact
the Avaya Navy Shipboard Services organization.
Related links
Branch Gateway installations on page 21
Branch Gateway racks on page 22
Mounting the Branch Gateway on a wall on page 25
Branch Gateway racks
The Branch Gateway mounts in a standard 19-inch rack.
You can fasten the Branch Gateway to the rack either at the front of the Branch Gateway or at the
middle. In either case, mounting brackets must be attached to the Branch Gateway.
There are two types of mounting brackets provided with the Branch Gateway:
• Without cable guides. Two mounting brackets without cable guides are provided.
• With cable guides. One mounting bracket with cable guides is provided. This bracket provides
guides for electrical cables and is useful for cable management.
Related links
Mounting the Branch Gateway chassis on page 21
Brackets without cable guides on page 22
Attaching a mounting bracket to the front of the Branch Gateway on page 23
Attaching a mounting bracket to the middle of the Branch Gateway on page 23
Brackets with cable guides on page 23
Attaching a mounting bracket with cable guides on page 24
Attaching each mounting bracket to the Branch Gateway on page 24
Before mounting the Branch Gateway on page 24
Mounting the Branch Gateway in the rack on page 25
Brackets without cable guides
Mounting brackets without cable guides can be attached in either of the following positions:
• To each side of the front of the Branch Gateway for fastening the chassis to the rack at the
front
Installing the Branch Gateway and EM200
February 2017 Installation and Upgrades for the Avaya Branch Gateway G430 22
Comments on this document? infodev@avaya.com
To Next Page
