Name Description
Outgoing Channel ID Encoding Used for encoding Channel ID IE
Digit Handling (in/out) Defines overlap receiving and transmitting
rules
Network (Japan) Needs Connect Before
Disconnect
Sends a CONNECT message before
sending a DISCONNECT message, if
enabled
Send Name Specifies whether the Group Name is to be
specified with the message sent while
connecting to the network
Send Calling Number Specifies whether the Trunk Group Number
is to be specified with the message sent while
connecting to the network
Incoming Calling Number - Format Specifies how to fill the Calling Party Number
and Called Party Number IEs
Incoming Destination Sets a destination station for routing
incoming trunk group calls
Trunk Hunt Determines the method in which the
survivable-call-engine selects an available
trunk from the trunk group pool
Sig Grp Specifies the Signaling Group Number that
is the manager of this ISDN trunk member
Collecting DS1 trunks data
Procedure
1. At the SAT, enter display ds1 location to display the DS1 administration for
a particular circuit pack location.
2. Gather the following DS1 information for each DS1 facility:
• Name
• Bit-Rate
• Signaling Mode
• Channel Numbering
• Connect
• Interface
• Side
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 147
To Next Page
Loading...
