• Country Protocol
• Protocol Version
• DCP/Analog Bearer Capability
• Interface Companding
• ITN-C7 Long Timers
3. Repeat the display ds1 location command and press Enter for each circuit
pack that you want to included in the SLS data set.
DS1 circuit pack field descriptions
Related topics:
Name on page 148
Bit Rate on page 149
Signaling Mode on page 149
Channel Numbering on page 149
Connect on page 150
Interface on page 150
Interface on page 150
Side on page 151
Country Protocol on page 151
Protocol Version on page 151
DCP/ANALOG Bearer Capability on page 152
ITN-C7 Long Timers on page 152
Name
Assigns a significant, descriptive name to the DS1 link. Use the vendor’s circuit ID for the link
in this field because that information helps troubleshoot problems with the link. This field can
also be used to indicate the function or the destination of this DS1 facility. Accepts up to 15
characters.
Note:
Avaya BRI stations support only ASCII characters. Non-ASCII characters, such as Eurofont
or Kanafont, are displayed incorrectly on a BRI station.
Standard Local Survivability (SLS)
148 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
Loading...
