Avaya G430 - Page 349

that enables offline troubleshooting of QoS problems.The trap rate is controlled by
a configurable trap rate limiter.
Note:
QoS trap generation is an especially convenient troubleshooting tool for large
installations, since all devices that support the RTP statistics application can be
configured to send traps to a single SNMP trap manager.
7. Generates QoS fault and clear traps.
QoS fault traps are notifications that are sent when more than a configurable
number of active sessions have QoS indicators over the configured thresholds. A
QoS clear trap is a notification that is sent after a QoS fault trap when the number
of active RTP sessions with QoS indicators over the configured thresholds reduces
to a specified number.
Related topics:
Configuring the RTP statistics application on page 349
RTP statistics output on page 358
RTP statistics examples on page 373
Summary of RTP statistics commands on page 381
Configuring the RTP statistics application
About this task
To configure the RTP statistics application, work through the following sections, in order:
Procedure
1. Viewing RTP statistics thresholds on page 350
2. RTP statistics thresholds on page 352
3.
RTP statistics application on page 353
4. Viewing application configuration on page 354
5. QoS traps on page 355
6. QoS fault and clear traps on page 357
7. The trap rate limiter on page 357
Related topics:
Viewing RTP statistics thresholds on page 350
RTP statistics thresholds on page 352
Monitoring applications
Administering Avaya G430 Branch Gateway October 2013 349