Avaya G430 - Page 386

Configuring capture lists
Procedure
Use the ip capture-list command, followed by the list number, to enter the
context of a capture list (and to create the capture list if it does not exist).
Capture lists are numbered from 500 to 599.
For example:
Gxxx-001(super)# ip capture-list 510
Gxxx-001(super-Capture 510)#
Example
You can use the following commands to set the parameters of the capture list:
• Use the name command to assign a name to the capture list.
• Use the owner command to record the name of the person that created the list.
• Use the ip-rule command to define rule criteria for the capture list.
Note:
You can use the cookie command to set the list cookie for the capture list. However,
capture list cookies are not currently used by any application.
Related topics:
Rule criteria for a capture list on page 386
Configuring rule criteria for a capture list on page 387
Viewing the capture list on page 392
Applying a capture list on page 393
Configuring packet sniffing settings on page 393
Starting the packet sniffing service on page 395
Rule criteria for a capture list
Once in the capture list context, use the ip-rule command, followed by a number from 1 to
9999, to define a set of criteria against which to test packets. In addition to the rule criteria,
each rule must include a composite operation. The composite operation determines the action
the rule takes with respect to packets that match the rule criteria, and can be one of the
following:
• capture
• no-capture
Monitoring applications
386 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com