Avaya G430 - Page 396

Analyzing captured packets
Procedure
Analyze the captured packets by stopping the packet sniffing service, uploading the
capture file, and analyzing the capture file.
Related topics:
Stopping the packet sniffing service on page 396
Viewing packet sniffing information on page 396
Uploading the capture file on page 397
Capture file analysis on page 399
Stopping the packet sniffing service
Procedure
Enter capture stop to stop the packet sniffing service.
Stop the service in order to upload a capture file.
Note:
The capture stop command is not saved in the startup configuration file.
Viewing packet sniffing information
Procedure
1. You can enter show capture to view information about the packet sniffing
configuration and the capture state.
For example:
Gxxx-001> show capture
Capture service is enabled and inactive
Capture start time 19/06/2004-13:57:40
Capture stop time 19/06/2004-13:58:23
Current buffer size is 1024 KB
Buffer mode is cyclic
Maximum number of bytes captured from each frame: 1515
Capture list 527 on interface “FastEthernet 10/3”
Number of captured frames in file: 3596 (out of 3596 total captured frames)
Size of capture file: 266 KB (26.6 %)
Note:
The number of captured frames can be larger than the number of the frames in
the buffer because the capture file may be in cyclic mode.
Monitoring applications
396 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com