For example:
Gxxx-001(config-if:FastEthernet 10/3)# exit
Gxxx-001#
IPSec VPN maintenance
You can display IPSec VPN configuration and status, and clear IPSec VPN data, using certain
show and clear commands. In addition, you can display the IPSec VPN log to verify the
success or failure of IPSec VPN operations, and to view the actual configuration of both peers
for a successful debug in case of a problem.
For a description of these commands, see Summary of VPN commands on page 550 or
Avaya Branch Gateway G430 CLI Reference.
Related topics:
Commands used to display an IPSec VPN configuration on page 502
Commands used to display IPSec VPN status on page 503
Clearing both ISAKMP connection and IPSec SAs on page 503
Configuring IPSec VPN logging on page 503
Commands used to display an IPSec VPN configuration
•
show crypto ipsec transform-set
•
show crypto isakmp policy
•
show crypto isakmp peer
•
show crypto isakmp peer-group
•
show crypto map
•
show ip crypto-list list#
•
show ip crypto-list
•
show ip active-lists
For a description of these commands, see
Summary of VPN commands on page 550
For a full description of the commands and their output fields, see Avaya Branch Gateway
G430 CLI Reference.
IPSec VPN
502 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com
To Next Page
Loading...
