Customizing Presence or BLF parked call indication
About this task
Use this procedure to customize the various indicators when a call is parked at the monitored
user’s extension number. This setting applies to all your monitored users.
Procedure
1. Press Main menu:
.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Busy lamp field, and press Select.
6. Scroll to Parked indication, and select one of the following:
• None: To set the BLF parked call indication to none.
• Audible: To set the BLF parked call indication as an audible ringtone.
• Visual: To set the BLF parked call indication to visual.
When a call is parked at monitored user’s extension number, you can view the parked
call details on a pop-up screen similar to the primary line incoming call.
• Both: To set the BLF parked call indication to both audible and visual.
When a call is parked at a monitored user’s extension number, you can view the parked
call ID, and the station the call is parked on a pop-up screen.
• Default: To set the BLF pick up indication, selected by your system administrator.
7. Press Save.
Customizing the ring tone
Before you begin
Ensure your administrator enables customizing the ring tone.
Ensure BLF incoming call indication or BLF parked call indication is set to Audible or Both.
Procedure
1. Press Main menu:
.
2. Scroll to Settings, and press Select.
3. Scroll to Audio, and press Select.
4. Scroll to Personalize ringing, and press Select.
Busy Lamp Field
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 106
Comments on this document? infodev@avaya.com
To Next Page
Loading...
