Avaya J159 - Making a Blind Transfer; Call Waiting

Name Description
Use mobility calling line ID Specifies that the mobile number is used as the
calling line identity when a call is made from this
mobile device.
BroadWorks call control Specifies that the call control is with the
BroadWorks and not with the mobile device.
Use diversion inhibitor Specifies that the call is not redirected for an
unanswered call.
Answer confirmation required Specifies that a confirmation digit is required after a
mobile call leg is answered.
Device to ring Specifies that the device must ring when the phone
number gets a call.
Use the Right Arrow or Left Arrow key to select
one of the following:
• Fixed: To set the office phone or fixed devices to
ring when the phone number gets a call.
You can select SCA, BroadWorks Anywhere, and
executive location for fixed.
• Mobile: To set the mobile phone to ring when the
phone number gets a call.
• Both: To set both the mobile phone and the fixed
device to ring when the phone number gets a call.
Include shared call appearance Specifies that all SCA devices are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Include BroadWorks Anywhere Specifies that all BroadWorks Anywhere locations
are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Include executive assistant Specifies that all executive assistant locations are
alerted.
Ensure to set Device to ring to either Fixed or
Both.
Mobile identities alerted Specifies the list of mobile identities that are alerted.
BroadWorks Anywhere and Mobility icons
The following table displays the BroadWorks Anywhere Mobility icons for the Avaya J159 IP
Phone.
Advanced features
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 80
Comments on this document? infodev@avaya.com