4. Do one of the following:
• Press Complete or Transfer button after the recipient answers the call.
The call transfer is complete. This is also called attended transfer.
• Press Complete or Transfer button after the recipient’s number starts ringing.
The call transfer is complete. This is also called unattended transfer.
Making a blind transfer
About this task
Use this procedure to transfer an active call without connecting a call with the transfer recipient.
Procedure
1. While on an active call, press Transfer or Transfer button.
The phone displays the Enter Transfer Destination screen.
2. Do one of the following and then press the Call soft key:
• Dial the number to which you want to transfer the call.
• Search for the number in the Contacts or Recents list.
• Redial the last dialed number by using the Redial button.
• Highlight the extension on the phone screen, and press Transfer button.
3. To initiate a blind transfer, press Now or Transfer button.
The call transfer is complete.
Call Waiting
With the Call Waiting feature, you can get a notification about another incoming call even when
you are on a call. If this feature is enabled, the caller is put on waiting instead of hearing a busy
tone.
The phone displays incoming call screen, plays incoming call ringtone, and the beacon LED
flashes.
Enabling and disabling the Call Waiting feature
Procedure
1. Press Main menu: .
Call Waiting
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 91
Comments on this document? infodev@avaya.com
To Next Page
Loading...
