Avaya J159 - Manual Account Code Entry

Enabling and disabling BroadWorks Mobility alerting
Procedure
1. Press Main menu:
.
2. Scroll to Features: , and press Select.
3. Scroll to BroadWorks Mobility, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on, indicating that some or all configured mobile alerting are
enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that all configured mobile alerting are disabled.
Note:
If the LED does not light, contact your administrator.
Configuring BroadWorks Mobility
About this task
Use this procedure to configure the mobile device you want to use in conjunction with your office
phone.
Before you begin
Ensure your administrator has enabled the BroadWorks Mobility feature for your extension.
Procedure
1. Press Main menu:
.
2. Scroll to Settings, and press Select.
3. Scroll to Features: , and press Select.
4. Scroll to BroadWorks Mobility, and press one of the following:
5. Scroll to Mobile identity alerting, and press Select.
6. Do the following:
• Press Toggle for the required mobility numbers.
• Press Back to go back to the previous menu.
7. Scroll to Profile identity alerting.
BroadWorks Mobility
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 77
Comments on this document? infodev@avaya.com