Anonymous Call Block
With the Anonymous Call Block feature, you can reject calls from anonymous parties who have
explicitly restricted their caller ID. Callers without caller identification are informed that you are not
accepting calls. Your phone will not display any audio or visual notification of the attempted call.
The calling party will hear the following announcement: “The party you are trying to reach does not
accept unidentified call, please try your call again later”.
Important:
This feature is not applied to calls from or within the group.
BroadWorks Anywhere
With the BroadWorks Anywhere feature, you can make and receive calls using any phone from
any location. You can use this feature to:
• Configure other phones to work in conjunction with your business phone.
• Make calls from phones using your BroadWorks business phone number as the Calling Line
ID.
• Move calls across phones.
• Specify phones on which you can attend calls.
Note:
To activate the feature, contact your system administrator or go to the BroadSoft web interface
yourself to activate the feature. See https://www.broadsoft.com/ for more information.
Enabling and disabling BroadWorks Anywhere
Procedure
1. Press Main menu: .
2. Scroll to Features: , and press Select.
3. Scroll to BroadWorks Anywhere, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on if one location is configured, else the user is redirected to
the feature configuration to perform one of the following:
- Press Add: To add a location.
- Press Delete: To delete a location.
- Press Edit: To modify a location.
Anonymous Call Block
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 73
Comments on this document? infodev@avaya.com
To Next Page
Loading...
