You cannot use this feature while on an active conference call.
Before you begin
Ensure that the administrator enabled the feature.
Ensure that you are on an active call.
Procedure
1. Press Main menu and scroll to Features.
2. Press Select.
3. Scroll to Dynamic Park and Page, and press Select.
The phone parks the call in one of the parking slots, and you receive an audio notification
of the parked extension.
The phone is in the page mode.
4. Do one of the following to select the user or page target group that you want to page:
• Select the required page target group, and press Page.
• Dial the extension number of the user or page target group that you want to page, and
press Page.
• Press Contacts. Select the required user, and press Page.
• Press Recents. Select the required user, and press Page.
The phone pages the parked call details to the selected user or the page target group.
Retrieving a parked call
About this task
If you have parked a call, you can retrieve the parked call before paging it. Other users can
retrieve a parked call after receiving the page.
The phone displays the page details on the Application header, which is the second line from top
of the phone screen.
You cannot use the following features on a paged call:
• Conference
• Hold
• Transfer
• Private Hold
Before you begin
Ensure that you have parked a call using the Dynamic Park and Page feature.
Advanced features
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 88
Comments on this document? infodev@avaya.com
To Next Page
Loading...
