8. Configure the following fields:
• Device to ring
• Include shared call appearance
• Include BroadWorks Anywhere
• Include executive assistant
• Mobile identities alerted
Profile identity alerting field description
Name Description
Device to ring Specifies that the device must ring when the phone
number gets a call. Use the Right Arrow or Left
Arrow key to select one of the following:
• Fixed: To set the office phone or fixed devices to
ring when the phone number gets a call.
Per your requirement you can select SCA,
BroadWorks Anywhere, and executive location for
fixed.
• Mobile: To set the mobile phone to ring when the
phone number gets a call.
• Both: To set both the mobile phone and the fixed
device to ring when the phone number gets a call.
Include shared call appearance Specifies that all SCA devices are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Include BroadWorks Anywhere Specifies that all BroadWorks Anywhere locations
are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Include executive assistant Specifies that all executive assistant locations are
alerted.
Ensure to set Device to ring to either Fixed or
Both.
Mobile identities alerted Specifies the list of mobile identities that are alerted.
Editing Mobile identity alerting
Before you begin
Ensure Mobile identity is configured.
Advanced features
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 78
Comments on this document? infodev@avaya.com
To Next Page
Loading...
