Configuring BroadWorks Anywhere Alerting
About this task
Alerting indicates if the locations are notified of click to dial call and group paging calls. Use this
procedure to configure Alerting for the BroadWorks Anywhere feature.
Before you begin
Ensure to enable a location.
Procedure
1. Press Main menu: .
2. Scroll to Settings, and press Select.
3. Scroll to Features: , and press Select.
4. Scroll to BroadWorks Anywhere, and press Select.
5. Scroll to Alerting, and press Select.
6. Press Toggle for the required Alerting option:
• Include click to dial: To set the alerting of the location when making a click to dial call.
• Include group paging: To set the alerting of the location for the group paging calls.
7. Press Save.
Alerting is set to the location.
BroadWorks Mobility
With the BroadWorks Mobility feature, you can use your personal mobile device in conjunction
with your desk IP phone. You can make calls from your personal mobile using a BroadWorks
business number as the calling ID.
Limitations
The following are the limitations of the BroadWorks Mobility feature:
• Only an administrator can enable or disable the Mobility feature.
• Only an administrator can add the mobile numbers for the Mobility feature.
Note:
To activate the feature, contact your system administrator or go to the BroadSoft web interface
to activate the feature. See https://www.broadsoft.com/ for more information.
Advanced features
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 76
Comments on this document? infodev@avaya.com
To Next Page
Loading...
