Avaya J159 - Transferring a Call to Voicemail; Transferring a Held Call

- Press Toggle: To enable or disable a location.
Note:
The BroadWorks Anywhere feature is enabled only if a location is enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that the feature is available, but inactive.
4. (Optional) To enable or disable BroadWorks Anywhere feature, press the corresponding
line key.
Configuring BroadWorks Anywhere locations
About this task
A location is a phone number that you can use with your primary business number. Use this
procedure to configure locations for the BroadWorks Anywhere feature.
Procedure
1. Press Main menu: .
2. Scroll to Settings, and press Select.
3. Scroll to Features: , and press Select.
4. Scroll to BroadWorks Anywhere.
5. Scroll to Locations, and press Select.
6. Press Add, and configure the following:
• Phone number: The phone number that you want to use for BroadWorks Anywhere.
• Description: A brief description about the phone number.
• Alternate phone number: The alternate phone number that you want to use for
BroadWorks Anywhere.
• BroadWorks call control: The BroadWorks server controls the call. Press Toggle to
enable the server-based call control.
• Use diversion inhibitor: To prevent call redirection for unanswered calls.
• Answer confirmation required: A confirmation digit is required to prevent redirection of
incoming call to non BroadWorks device.
7. Press Save.
The phone number is added as a location.
8. To cancel the changes and go back to the previous menu, press Cancel.
Advanced features
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 74
Comments on this document? infodev@avaya.com