8. If the security is 802.1x EAP, enter the following:
• Identity: Either your personal user ID or the shared user ID provided by your system
administrator.
• Anonymous Identity: Leave blank or use the shared Anonymous Identity provided by
your system administrator.
• Password: Either your personal password or the shared password provided by your
system administrator.
Result
If the credentials are authenticated successfully, the phone automatically restarts to complete the
connection.
Related links
Setting the network mode on page 24
Setting the network mode
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 27
Comments on this document? infodev@avaya.com
To Next Page
Loading...
