Procedure
Dial the park slot number that is assigned for the parked call. The park slot number is in the page
details.
The call is unparked.
Group Paging
Group Paging is a group feature that allows unidirectional paging for a group of users by dialing a
group paging directory number (DN) or an extension. The feature can be configured by a group
administrator or higher.
Multicast Paging
With the Multicast Paging feature, you can receive a page that will be automatically played on the
phone. If configured by the system administrator, you can send a multicast page to a group of
phones in the network.
An incoming multicast page is played on the phone speaker. When the page is played, the Phone
screen displays the Page from <group name> notification during the whole time of
transmission.
All configured multicast groups that you can send a page to are available in the Features menu.
You can add, move or delete the multicast page keys from the Phone screen by the common
customization procedure.
Active calls with a lower priority than the multicast page are put on hold, all lower-priority incoming
calls are ignored.
A multicast page is ignored if the agent is on an active call and has the Do Not Disturb status, or
making an emergency call.
Sending a multicast page
About this task
You can send a multicast page to a group of users by activating the Multicast Paging group on the
Phone screen. If the required group is not added on this screen, you can access all multicast page
groups configured for your phone in the Features menu.
Procedure
1. Do one of the following:
• Lift the handset.
Group Paging
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 89
Comments on this document? infodev@avaya.com
To Next Page
Loading...
