Avaya J159 - Page 115

5. To set up the indication type, scroll to Incoming indication and toggle one of the following:
• Audible — the phone only plays a ringtone when there is an incoming call on a shared
line. No pop-up is displayed.
• Visual — the phone only displays a pop-up message when there is an incoming call on
a shared line. No ringtone is played.
• Both — the phone uses both indication types.
• None — the phone does not alert you about incoming calls on this shared line.
• Default — the phone uses the administrator set value.
6. Scroll to Indication delay.
7. Enter the number of seconds for incoming call alert delay.
8. Press Save to save your settings.
9. (Optional) Press Cancel to revert to default settings.
Related links
Shared call appearance on page 110
Viewing SCA configuration
About this task
View the configuration of the additional SCA extensions. Depending on the phone’s settings, you
can view or modify the SCA configuration.
Before you begin
Ensure that your administrator has configured a shared primary extension.
Procedure
1. Press Main menu:
.
2. Scroll to Settings, and press one of the following:
• Select
• OK
• The corresponding line key
3. Scroll to Shared lines, and press one of the following:
• Select
• OK
• The corresponding line key
Viewing SCA configuration
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 115
Comments on this document? infodev@avaya.com