No. Name Description
6 WLAN Module Panel To integrate the wireless module for Wi-Fi
and Bluetooth support.
7 PoE Slide Switch To set the PoE value to one of the following:
• L: Class 1
• H: Class 2
8 USB Port To connect the USB device.
Related links
Phone overview on page 14
Secondary display
The secondary display of the phone provides additional call appearances and feature or
application display.
It has six lines of four-page display that provides 24 additional lines for incoming calls, outgoing
calls, auto-dialing, and calling features. It displays the dedicated view for keys 25-48. You can
switch between the pages using the left and right keys.
Related links
Phone overview on page 14
Optional components
You can use the following components for your phone. These components are not a part of your
phone package and needs to be ordered separately. You might need the assistance from your
system administrator to install few of these items:
• PSAC12R–050 – 5V DC Power adapter.
• PoE power supply.
• Avaya J100 Wireless Module (Wi-Fi Module).
• USB devices such as USB Flash drive and keyboard.
Note:
Avaya does not supply USB devices.
Related links
Phone overview on page 14
Phone overview
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 20
Comments on this document? infodev@avaya.com
To Next Page
Loading...
