Doing a quick search for a contact
About this task
Using the Quick Search feature of the phone, you can quickly search for a saved contact from the
Contacts list without entering the entire name of the contact.
Before you begin
Ensure that at least one contact is available in the Contacts list.
Procedure
1. Press Contacts.
2. (Optional) To navigate through Main menu, do the following:
a. Scroll to Applications and press Select.
b. Scroll to Contacts and press Select.
3. Press the key corresponding to the first letter of the first or last name of the contact on the
dial pad.
Result
The phone displays all the contacts whose first or last name begins with the letter associated with
the pressed key.
LDAP Directory
With the LDAP Directory feature, you can search contacts in available Lightweight Directory
Access Protocol (LDAP) directories. An LDAP directory option appears at the top of the Contacts
application list.
You can also select an LDAP directory as your contact search source. This selection disables
other search sources. When LDAP directory is an active search source, if you select another
search source, this selection disables LDAP directory search.
You can enter multiple search keywords and view up to 49 attributes for each match, such as
personal names, addresses, job titles and telephone numbers.
You can add frequently used LDAP contacts to your local Contacts with the help of the +Contact
soft key.
You can combine any found LDAP contact with an existing local contact with the help of the
Combine soft key.
In 3PCC environment, this feature is not available for CCMS mode.
Contacts
February 2022 Using Avaya J159 SIP IP Phone in Open SIP 46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
