Avaya J179 - Barging in on an Active Call; Unparking a Call

Note:
If your monitored user holds a local conference call, you can receive multiple incoming calls
for each held participant.
Related links
Busy Lamp Field on page 104
Barging in on an active call
About this task
Use this procedure to barge in on an active call if the monitored user is busy .
Before you begin
Ensure that the administrator has activated the direct call pick up with barge in operation on your
phone.
Procedure
Press Barge in or the corresponding BLF line key.
Related links
Busy Lamp Field on page 104
Unparking a call
About this task
Use this procedure to unpark a parked call for the monitored user.
A call parked by the monitored user is indicated with the parked call icon
and the blinking of
the green LED of the corresponding line key.
Before you begin
Ensure that the administrator has activated the Call Retrieve feature.
Procedure
Press Unpark or the corresponding BLF line key.
Related links
Busy Lamp Field on page 104
BLF call operations
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 109
Comments on this document? infodev@avaya.com