The calling party will hear the following announcement: “The party you are trying to reach does not
accept unidentified call, please try your call again later”.
Important:
This feature is not applied to calls from or within the group.
Autodialing a pre-assigned number
About this task
The autodialing feature enables you to quickly call the pre-assigned numbers. While your phone is
off-hook, on-hook, and from line key. Your system administrator might set up few frequently called
numbers, such as the IT Help Desk for autodialing. These numbers are displayed on the phone
screen.
Before you begin
Ensure that your system administrator has set up few frequently called numbers to use this
feature.
Procedure
Do one of the following to autodial a number:
• If your phone is on-hook, choose the number which appears on your phone screen, and press
the Call soft key or the OK button.
• If your phone is off-hook, the autodialing screen appears, press the required line key.
• You can choose a number from the Expansion Module and press the required line key.
BroadWorks Anywhere
With the BroadWorks Anywhere feature, you can make and receive calls using any phone from
any location. You can use this feature to:
• Configure other phones to work in conjunction with your business phone.
• Make calls from phones using your BroadWorks business phone number as the Calling Line
ID.
• Move calls across phones.
• Specify phones on which you can attend calls.
Note:
To activate the feature, contact your system administrator or go to the BroadSoft web interface
yourself to activate the feature. See https://www.broadsoft.com/ for more information.
Autodialing a pre-assigned number
April 2021 Using Avaya J169 and J179 SIP IP Phones in Open SIP 67
Comments on this document? infodev@avaya.com
To Next Page
Loading...
