9. Perform additional basic configuration, such as setting the time zone and date, as described in Setting
Basic System Information on page 66.
10. Configure the system to work with the IP Office Proxy/Registrar, as described in Registering the XT
Server to IP Office on page 61. If you do not register to IP Office, you cannot host videoconferences or
use the full functionality of the system.
11. Disable local video and audio, as described in Configuring Call Settings on page 63.
12. If you connected a monitor and are configuring from the endpoint, you can modify the default
administrator PIN code as described in Setting the Administrator PIN Code for the XT Server on page
71 (recommended).
13. If necessary for your deployment, configure your advanced network and call settings, as described in
Configuring Network Settings on page 76.
For more information about deployment setups, see Planning the Topology of the Scopia XT Server for IP
Office Deployment on page 12 and the Scopia Solution Guide.
14. (Optional) If necessary for your organization, you can secure videoconference sessions via encrypted
connections and TLS certificates (see Securing your Scopia XT Server for IP Office on page 88).
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited for usage. For
more information, consult your local reseller.
Installation Guide for Scopia XT5000 Server for IP Office Version 3.2 Installation Workflow for Scopia XT Server for IP Office | 11
To Next Page
Loading...
